Infrared Photocell Sensors

Model:IR-20

Technology Parameter

Power supply ：12/24V（AC/DC)
Max.Range up ：20Meters(indoor or outdoor)
Opera temperature ：-10℃+60℃
Max.TX working current ：25mA
Max. RX working current ：35mA
Max. Relay contact ：Max 500mA e 48VAC/DC
IP rate ：IP65
Meterial ：ABS
Net Weight ：160g

Installation

1. To open the IR-20, lift the front panel of the photocell.
2. Insert the cables in their housing and fix the base to the wall. If the photocell has to be mounted on a  wall, drill the three 5 ø holes and fit suitable screw anchors. If the photocell has to be mounted on  metal, drill the three 3 ø holes for fitting with the self_tapping screws.
3. Make the connections. Power the photocells with a voltage can be 12-24 VAC or 12-30 VDC. If  positioning, alignment and connection have been carried out properly, the red LED on the receiver will be off. Each time the ray is interrupted, the red LED switches on. 
4. Cover the photocell with the front panel. Insert to the stop and close it. Interrupt the ray several times checking the relay response. 
5. Fix the front panels with the provided screws.

Connection

Note:For one-to-one use: using AC and need to be shorted by the jump line hat.



Installation Diagram And Application





Size






Model:WIS-30


Technology Parameter

Power Supply Transmitter ：2 x AA Alkaline Batteries, Only replace with alkaline batteries; do not use rechargeable batteries with this product.
Receiver ：12-24VAC  12-24VDC
Max.Range up ：30 Meters
Opera temperature ：-20℃+60℃
Max.TX working current ：<50uA
Max. RX working current ：30mA @ 12V DC
Max. Relay contact ：Max 500 mA e 48 Vac/dc
IP rate ：IP65
Meterial ：PC (UV) 
Net Weight ：160g
Battery using life ：≥ 2 years


Connection

Note : For safety used we suggest use Y capacitor connect to the COM contact and the power supply Earth.
Installation Diagram And Application


Size



Model:IS-30R

Technology Parameter

Power Supply Transmitter ：2 x AA Alkaline Batteries, Only replace with alkaline batteries; do not use rechargeable batteries with this product.
Receiver ：12 - 24V AC 12 - 30V DC
Rotation Angle ：180 Degree
Receiver Power Consumption ：30mA @ 12V DC
Transmitter Battery Life ：Minimum 2 years
Battery Low Indication ：Audible Beep
Specified Operating Distance ：30m
Alignment ：Automatic – 1m² @ 10m (circular area - assumes parallel surface)
Output Contact ：Fail-safe, N/C and N/O, potential free contact
Output Contact ：3A @ 30V DC Non-inductive
Operating Temperature ：-20°C - +60°C
Operating Humidity ：0 - 90° Non-condensing
Degree of Protection ：Ip66
Housing Material ：PC(UV)
Size ：113*46.79*47.72mm




Installation 

1. Align the two holes in the case and lock two screws.
2. Put the battery inside(transmitter),thread the cable out(receiver).
3. Fix the screw.
4. Rotate the angle as required,and finally fix the bottom screw.

Gate Automation Application

Size



Model:IRR-7M

Technology Parameter

Sensing mode ：Retro-reflective
Sensing distance ：6M
Sensing object ：Opaque object,min ψ75mm
Response time ：≤3ms
Supply voltage ：DC12-24V(10-30V DC)/ ripple(p-p): 10% max
Output type ：NPN output
Output status ：N.O.
Consumption ：≤20mA
Load current ：200mA


Technical parameter 
01. Voltage drop(V,):≤1.8V(200mA)
02. LED display:Red LED
03. Sensitivity adjustment:non-adjustable
04. Circuit Protection:Short circuit protection, reversed polarity protection and overload protection
05. Operating temperature:-10....+55℃
06. Insulation Resistance:≥50ΜΩ
07. Anti-impact:10...55Hz(amplitude 1.5mm)X,Y, Z direction, each 10times
08. Protection:Ip67
09. Connection:Cable: ψ4.8mm 2M
10. Housing material:PBT
11. Accessories:mounting bracket: 1pcs; Reflector: 1pcs
12. Product size:50*50*18cm
Applications
01. Logistics:Storage & Conveyor, especially pallet detection
02. Machine builders (e.g. packaging, handling, wood processing, paper)
03. Automotive
04. Automated car park systems
05. Doors and gates
06. Distribution
Size


More product information please contact me:

Juli Xu

Sales Specialist

Mobile: 0086-15778018527

Whatsapp: 0086-15778018527

Skype: Juli Xu

E-mail: jutaisales2@gmail.com

sales15@jutairfid.com

Wechat: JuliXu15

评论

发表评论

此博客中的热门博文

How to choose and install Gate Automation Photocell

图片
How to choose and install Gate Automation Photocell Automatic gates open and close when instructed by a variety of methods. Remote transmitters are carried by gate owners to operate their gates at the push of a button on the remote. Access control systems use gate release buttons inside the property to open the gates. And keypads or proximity readers installed outside the gates allow access for anyone with the code or programmed proximity tag.  It is also possible to bury a loop cable in the driveway inside the gates that operates the gates when a vehicle passes over it. Under normal conditions, automatic gates open when instructed to do so and then close after a certain period of time. However, moving gates should not be allowed to hit anything or anyone, so a way to tell them that something is in their path is needed. This is what safety photocells are for. Photocells come in pairs and function by sending an infrared beam from one to the other. If this beam is broken, ...
阅读全文

Inductive vehicle loop detector supplier

图片
An inductive loop detector is an electromagnetic communication or traditional traffic detection system which mostly uses buried coils and moving magnet to induce an electric current. And it is currently the largest amount of traffic detection device in the world. The embedded toroidal coil type vehicle detector is mainly composed of a regulated power supply, an oscillating coil, a logic circuit, a microprocessor, an interface and a driving circuit, a signal output circuit, an induction coil and so on. A vehicle detector is based on the principle of electromagnetic induction. A group of (2) ring-shaped induction coils with a certain working current are buried in the roadbed section of the same lane. When the vehicle passes or stops in the annular buried coil, the vehicle itself cuts the magnetic flux line, causing the wire loop inductance. The amount of change, the detector can detect the passing state of the vehicle by detecting the change of the inductance, and transmi...
阅读全文

180° rotational photocell beam sensors

图片
EXTER NAL ROTATION WIRELESS INFRARED BEAM SENSOR IS-30R external rotation infrared gate safety beam with a wireless transmitter and there’s no need to tunnel under the driveway, With external rotation 180 degree, Simply rotational align, More convenient and safe for door automation! Main features: 1.With external rotation 180 degree - Simply rotational align，easy installation, save labor  installation cost. 2. The transmitter is wireless and battery-operated saving time and money. 3. 30 meters operating range – ideal for almost any entrance gate. 4. Fully ant-proof and weather-resistant enclosure for greater reliability. 5. Transmitter provides audible feedback for easy setup and battery-low indication. 6. Low power consumption throughout the system for greater efficiency. 7. Compatible with Intruder-detection Alarms for enhanced perimeter security. 8. Quick, easy installation with built-in laser beam alignment system....
阅读全文