photoelectric beam sensor 1-20M detecting range

12 / 24V Automatic door sensor infrared photocell
Automatic door sensor infrared photocell, When interrupting the infrared, the relay will output switch signal, it can work for parking barrier, walking gate, vehicle gate as body induction. It also can work as window, door and passageway anti-burglar detection.


Technical parameter:




Features:



Operation:




Connection:


Diagram:




Product Size:





Installation:

1. To open the IR-20M, lift the front panel of the photocell. Insert the cables in their housing and fix the base to the wall.
2. If the photocell has to be mounted on a wall, drill the three 5 ø holes and fit suitable screw anchors.If the photocell has to be mounted on metal, drill the three 3 ø holes for fitting with the self-tapping screws.
3. Make the connections. Power the photocells with a voltage between 12 and 24V DC/AC. If positioning, alignment and connection have been carried out properly, the red LED on the receiver will be off. Each time the ray is interrupted, the red LED switches on.

4. Cover the photocell with the front panel. Insert to the stop and close it. Interrupt the ray several times checking the relay response. Fix the front panels with the provided screws.


High quality photoeye:




JUTAI photocell beam sensors ordering information:

评论

发表评论

此博客中的热门博文

How to choose and install Gate Automation Photocell

图片
How to choose and install Gate Automation Photocell Automatic gates open and close when instructed by a variety of methods. Remote transmitters are carried by gate owners to operate their gates at the push of a button on the remote. Access control systems use gate release buttons inside the property to open the gates. And keypads or proximity readers installed outside the gates allow access for anyone with the code or programmed proximity tag.  It is also possible to bury a loop cable in the driveway inside the gates that operates the gates when a vehicle passes over it. Under normal conditions, automatic gates open when instructed to do so and then close after a certain period of time. However, moving gates should not be allowed to hit anything or anyone, so a way to tell them that something is in their path is needed. This is what safety photocells are for. Photocells come in pairs and function by sending an infrared beam from one to the other. If this beam is broken, ...
阅读全文

Inductive vehicle loop detector supplier

图片
An inductive loop detector is an electromagnetic communication or traditional traffic detection system which mostly uses buried coils and moving magnet to induce an electric current. And it is currently the largest amount of traffic detection device in the world. The embedded toroidal coil type vehicle detector is mainly composed of a regulated power supply, an oscillating coil, a logic circuit, a microprocessor, an interface and a driving circuit, a signal output circuit, an induction coil and so on. A vehicle detector is based on the principle of electromagnetic induction. A group of (2) ring-shaped induction coils with a certain working current are buried in the roadbed section of the same lane. When the vehicle passes or stops in the annular buried coil, the vehicle itself cuts the magnetic flux line, causing the wire loop inductance. The amount of change, the detector can detect the passing state of the vehicle by detecting the change of the inductance, and transmi...
阅读全文

180° rotational photocell beam sensors

图片
EXTER NAL ROTATION WIRELESS INFRARED BEAM SENSOR IS-30R external rotation infrared gate safety beam with a wireless transmitter and there’s no need to tunnel under the driveway, With external rotation 180 degree, Simply rotational align, More convenient and safe for door automation! Main features: 1.With external rotation 180 degree - Simply rotational align，easy installation, save labor  installation cost. 2. The transmitter is wireless and battery-operated saving time and money. 3. 30 meters operating range – ideal for almost any entrance gate. 4. Fully ant-proof and weather-resistant enclosure for greater reliability. 5. Transmitter provides audible feedback for easy setup and battery-low indication. 6. Low power consumption throughout the system for greater efficiency. 7. Compatible with Intruder-detection Alarms for enhanced perimeter security. 8. Quick, easy installation with built-in laser beam alignment system....
阅读全文