Standalone card reader access control management



Description
The unit is single door multifunction standalone access controller or a Wiegand output keypad or card reader. It is suitable for mounting either indoor or outdoor in harsh environments. It is housed in a strong, sturdy and vandal proof Zinc Alloy electroplated case which is available in either a bright silver or matt silver finish. The electronics are fully potted so the unit is. This unit supports up to 2000 users in either a Card, 4 digit PIN, or a Card + PIN option. The inbuilt card reader supports 125KHZ EM cards,13.56MHz Mifare cards. The unit has many extra features including lock output current short circuit protection, Wiegand output , and a backlit keypad. These features make the unit an ideal choice for door access not only for small shops and domestic households but also for commercial and industrial applications such as factories, warehouses, laboratories, banks and prisons.


Features
l Strong Zinc Alloy Electroplated anti-vandal case
l Full programming from the keypad
l 2000 users, supports Card, PIN, Card + PIN
l Can be used as a stand alone keypad
l Backlight keys
l Wiegand 26 input for connection to external reader
l Wiegand 26 output for connection to a controller      
l Adjustable Door Output time, Alarm time, Door Open time
l Very low power consumption (30mA)
l Fast operating speed, <20ms with 2000 users
l Lock output current short circuit protection
l Easy to install and program
l Built in light dependent resistor (LDR) for anti tamper
l Built in buzzer
l Red, Yellow and Green LEDS display the working status

Specifications

Installation
l   Remove the back cover from the keypad using the supplied special screw driver
l   Drill 2 holes on the wall for the Self tapping screws and I hole for the cable
l   Put the supplied rubber bungs to into the two holes
l   Fix the back cover firmly on the wall with 2 Self tapping screws
l   Thread the cable through the cable hole
l   Attach the keypad to the back cover.



Operations


Wiring Details



Common power supply diagram





Special power supply diagram


The unit operating as a Wiegand Output Reader
In this mode the unit supports a Wiegand 26 bit output so the Wiegand data lines can be connected to any controller which supports a Wiegand 26 bit input.



One unit package include



Applications
Door access control system
Elevator management system
Outdoor barrier gate vehicle access control
Visitor management system
Time attendance management






More product information please contact me:

Juli Xu

Sales Specialist

Mobile: 0086-15778018527

Whatsapp: 0086-15778018527

Skype: Juli Xu

E-mail: jutaisales2@gmail.com

           sales15@jutairfid.com

Wechat: JuliXu15

评论

发表评论

此博客中的热门博文

180° rotational photocell beam sensors

图片
EXTER NAL ROTATION WIRELESS INFRARED BEAM SENSOR IS-30R external rotation infrared gate safety beam with a wireless transmitter and there’s no need to tunnel under the driveway, With external rotation 180 degree, Simply rotational align, More convenient and safe for door automation! Main features: 1.With external rotation 180 degree - Simply rotational align，easy installation, save labor  installation cost. 2. The transmitter is wireless and battery-operated saving time and money. 3. 30 meters operating range – ideal for almost any entrance gate. 4. Fully ant-proof and weather-resistant enclosure for greater reliability. 5. Transmitter provides audible feedback for easy setup and battery-low indication. 6. Low power consumption throughout the system for greater efficiency. 7. Compatible with Intruder-detection Alarms for enhanced perimeter security. 8. Quick, easy installation with built-in laser beam alignment system....
阅读全文

How to choose and install Gate Automation Photocell

图片
How to choose and install Gate Automation Photocell Automatic gates open and close when instructed by a variety of methods. Remote transmitters are carried by gate owners to operate their gates at the push of a button on the remote. Access control systems use gate release buttons inside the property to open the gates. And keypads or proximity readers installed outside the gates allow access for anyone with the code or programmed proximity tag.  It is also possible to bury a loop cable in the driveway inside the gates that operates the gates when a vehicle passes over it. Under normal conditions, automatic gates open when instructed to do so and then close after a certain period of time. However, moving gates should not be allowed to hit anything or anyone, so a way to tell them that something is in their path is needed. This is what safety photocells are for. Photocells come in pairs and function by sending an infrared beam from one to the other. If this beam is broken, ...
阅读全文

Inductive vehicle loop detector supplier

图片
An inductive loop detector is an electromagnetic communication or traditional traffic detection system which mostly uses buried coils and moving magnet to induce an electric current. And it is currently the largest amount of traffic detection device in the world. The embedded toroidal coil type vehicle detector is mainly composed of a regulated power supply, an oscillating coil, a logic circuit, a microprocessor, an interface and a driving circuit, a signal output circuit, an induction coil and so on. A vehicle detector is based on the principle of electromagnetic induction. A group of (2) ring-shaped induction coils with a certain working current are buried in the roadbed section of the same lane. When the vehicle passes or stops in the annular buried coil, the vehicle itself cuts the magnetic flux line, causing the wire loop inductance. The amount of change, the detector can detect the passing state of the vehicle by detecting the change of the inductance, and transmi...
阅读全文